Newtron washable air filter

Contractor’s Choice Washable Air Filter

Contractor’s Choice filters the air with a very low initial air flow resistance (0.08″ w.g.). Constructed with a combination of woven electrostatic polypropylene and foam to achieve a high average arrestance efficiency, Contractors Choice air filter is environmentally friendly with no disposable parts. Standard disposable air filters trap only very large particles. Not only are these filters less efficient but they tend to clog, restricting air flow which results in increased heating and cooling costs.

Contractor’s Choice Delivers Low Air Flow Resistance

Low air flow resistance is extremely important in the proper operation of today’s high efficiency heating and cooling systems. Low resistance to air flow also means better circulation, even temperature control throughout the home and extended life of the system’s compressor and blower motor.

Contractor’s Choice Is Easy to Maintain

All that is required is to remove the filter, spray it with a common household cleaner, and rinse with water before you reinstall it.

The Contractor’s Choice air filter carries a lifetime warranty.

Homeowners Purchase Here

Request A Call Back

Thank you for your interest in Permatron air filters. We do not sell direct to homeowners, our website is strictly informational. You can purchase our products from your local HVAC contractor or we can refer you to a list of catalog/retail website partners where you can purchase online and ship the air filter directly to you.
Contact us to request a quote or product information on this product:
What best describes you?*
Full Name*
Company*
Phone
Email*
Country*
State / Province*
How did you hear about us?
Comments/Questions*

We promise to keep your info top secret.

The distributor you got me in contact with sent me the three PreVent Model R filters I was looking for. They are working great. Thank You.
Robert M. CoutureSeaman Paper Company of Massachusetts, 3rd Class Steam Engineer
Everything was correct & professionally served, finely crafted with accurate dimensions of quality material. I will purchase further metal mesh filters from your firm in the future as demand calls for.
Steven Sutherland HVAC Contractor, South Carolina
We had to change a combined condensing / free cooling coil because it was so badly damaged from debris and washing. 10k€ (approx. $12,000 USD) for the coil and works and 6k€ (approx. $7000 USD) for the crane hire. The second chiller on the site is perfect as the screen was fitted back some time ago.
Dave ClarkeCORE AIR CONDITIONING, SERVICE MANAGER
The filters we purchased are a great addition to our plant operations. I am looking at other applications for their use…
Ben StevensValero Renewable Fuels, Maintenance Manager
The order process went very well. We received the black washable fan bonnets 2 weeks ago and are very happy. I will order again in the future. Great product and great service. Thank You!
Geoff DawesFestival Foods, Maintenance Tech. II
It’s always a great idea to protect HVAC condenser coils with screening, especially if you can do it right after new equipment installation. Once the magnets where inserted into the screen grommets, it took literally less than a minute to place the screening on the equipment, adjust it, done. This screening will protect the condenser coils from grass cutting, bugs, cottonwood seedlings, etc.
Jim PodrazaArgonne National Laboratory - Planning Manager
The guys love them! Clean look, and easy to clean….
Dave GaborekHyatt Regency Ohare, Chief Engineer
Our customer, Logoplaste, uses and raves about the Prevent BHA Screens and MagnaMount Kits.We did an install at their manufacturing facility in June on two units, all four sides required screens. Installation time was drastically reduced from the original 6 hour estimate with standard mount clips, to complete screen installation in under 1 hour with MagnaMount clips.The facility is located along the river where cottonwood trees are very abundant. Even when installing PreVent, it was catching the cottonwood that was flying. I brought him out one of your cleaning brooms a week after install, and the Maintenance Manager said that it is the best money he has spent since he has worked at that facility. He is planning on purchasing some more for his 4 Cooling Towers as well.
Sonja HyderRamAir, Sales and Service
The PreVent bonnet style filter is the best thing I have ever bought to protect our cooling tower circular fan. We have to clean it every two weeks but it is so easy.
Martyn RogersCotek Papers Limited, Maintenance Manager
Permatron's PreVent screening was installed on recently replaced 363A RTU condenser coils, outside air and economizer openings, using MagnaMount magnets to hold them in place VS drilling and screwing them on. The magnets will most definitely be our primary mounting option going forward. All three screens took us literally less than five minutes to install. I noticed how quickly cottonwood was caught by the screening.The screens can be cleaned in place or easy removed for more detailed cleaning.
Jim PodrazaArgonne National Laboratory, Planning Manager

Documents and Downloads

Case Studies

Contractors Choice washable electrostatic air filter delivers a low 0.08″ w.g. initial air flow resistance.

Request a Quote