DustPlus® 2” Odor and Particulate Removal Air Filter
The DustPlus air filter, Model DP2, is uniquely designed to electrostatically remove airborne particulate matter, plus adsorb odors/fumes. Enclosed in a 2" thick galvanized steel frame that opens and closes for back panel replacement, this air filter contains a permanent/washable electrostatic front panel. Acting as a prefilter, this panel uses a combination of impingement and electrostatic charge to attract and hold airborne particles like dust. The permanently affixed rear wire panel creates a holding chamber for a high density odor and fume removal filter like activated carbon or carbon with alumina for light gases. Rugged framing provides stability when utilizing either disposable 1" filters or media pads. Built to withstand rigorous industrial conditions, including heavy dirt loads and vibration from high velocity air flow, DustPlus can be used as a prefilter to extend the service life of any type of costly replacement filter or to stabilize a less durable disposable filter. The front panel captures larger particles, allowing the odor removing media to work without interference by face loading of large airborne particles.
Replaceable fill options include a high density 60% minimum activity granular carbon only pack or carbon and alumina with potassium permanganate for light gases. Both options encased in flexible nylon mesh scrim.
DustPlus should be periodically rinsed or vacuumed free of accumulated particles. Water and a mild detergent may be used on the permanently attached front polypropylene panel; the activated carbon media/disposable filter inside the DustPlus should be removed from the frame and replaced. Depending on the environment, odor removing media like activated carbon can last up to six months. Once the media reaches maximum adsorption, it is simply removed and replaced. The HVAC system's recirculating fan should be kept running to ensure maximum air contact with filtration and adsorption media.
Filter frames also available in stainless steel.
Product model name
Model | DP-2 | CWCPO300 | CWBPO375 |
|---|---|---|---|
|
Material frame is made of
Frame | Galvanized Steel | None | None |
|
Filtering material used
Media | Polypropylene & Wire Mesh | 300 gms Carbon in Flexible Mesh | 375 gms Carbon & Alumina in Flexible Mesh |
|
Thickness filter is available in
Filter Thickness | 2" | 3/4" | 3/4" |
|
Percentage of dust captured by filter under test conditions
Average Arrestance Efficiency | 89% | N/A | N/A |
|
Clean filter resistance to air flow
Initial Resistance | 0.23" w.g. w/carbon 0.06" prefilter only | N/A | N/A |
|
Dust captured before reaching end of test pressure
Dust Holding Capacity | 108 grams | ||
|
Underwriters Laboratory flammability designation
U.L. Classification | Class 2 | ||
|
Length of time product is warrantied
Warranty | 5 Years | Disposible | Disposible |