Activated Carbon Panel Air Filter
Activated Carbon is widely recognized as effective methods of removing and preventing odor/fume buildup in recirculated air. Utilizing the finest quality coatings, 3.2 ounce non-woven polyester is impregnated 150% with finely ground activated carbon coatings, and heat set to retain those coatings when the media is rinsed or vacuumed. Just as a sponge soaks up water, activated carbon adsorbs organic based odors. When the media becomes saturated, the filter is disposed of and replaced with a new panel.
Model CHARWR, a flat panel type air filter, these models contain approximately 14 grams of activated carbon per square foot of media area, contained in a 1/8"-1/4" galvanized steel frame. Filters over 600 square inches must have wire support. Standard and custom sizes are available in 4-pack units. This filter can be used as an afterfilter in electronic air cleaners, PTAC units or any other type of equipment.
Product model name
Model | CHARWR-4PK |
|---|---|
|
Material frame is made of
Frame | Galvanized Steel |
|
Filtering material used
Media | Activated Carbon Non-Woven Polyester |
|
Carbon, zeolite, alumina, KMNO4
Media Coating | 15.1 grams per sq ft |
|
Thickness filter is available in
Filter Thickness | .25" |
|
Percentage of dust captured by filter under test conditions
Average Arrestance Efficiency | 81% |
|
Clean filter resistance to air flow
Initial Resistance | .14 inches w.g. |
|
Dust captured before reaching end of test pressure
Dust Holding Capacity | 80 grams @ 1.0 inch w.g. |
|
Reflects ability of air to pass through media
Air Permeability (CFM) | 900 +/- 100 cfm@0.5" w.g. |
|
Underwriters Laboratory flammability designation
U.L. Classification | UL900 Class 2 |