Odor and Fume Adsorption Panel Filter

Activated Carbon is widely recognized as effective methods of removing and preventing odor/fume buildup in recirculated air. Utilizing the finest quality coatings, 3/16" thick non-woven polyester is impregnated with finely ground coatings, and heat set to retain those coatings when the media is rinsed or vacuumed. Just as a sponge soaks up water, activated carbon adsorbs organic based odors. When the media becomes saturated, the filter is disposed of and replaced with a new panel.

A flat panel type air filter, these models contain approximately 14 grams of activated carbon per square foot of media area, contained in a 1/4" or 1" thick wire reinforced galvanized steel frame. Standard and custom sizes are available. Can be used for afterfilter in electronic air cleaners. PTAC units or any other type of HVACR equipment.

Model	CHAR-WR
Media Coating	Activated Carbon
Average Arrestance Efficiency	81%
Initial Resistance	.14 inches w.g.
Dust Holding Capacity	80 grams @ 1.0 inch w.g.

Sell Sheet PDF

Home | About Permatron | News | Contact Us | Site Map