**Industrial Strength Dust PLUS Odor Control**

The DustPlus air filter is uniquely designed to electrostatically remove airborne particulate matter, plus adsorb odors/fumes. Enclosed in a 2" thick steel frame, the air filter contains a permanent/washable electrostatic front panel. Acting as a prefilter, this panel uses a combination of impingement and electrostatic charge to attract and hold airborne particles like dust. The rear wire panel creates a holding chamber for various types of odor and fume removal filter media like activated carbon. Rugged framing provides stability when utilizing either disposable 1" filters or media pads. Built to withstand rigorous industrial conditions, including heavy dirt loads and vibration from high velocity air flow, DustPlus can be used as a prefilter to extend the service life of any type of costly replacement filter or to stabilize a less durable disposable filter. The front panel captures larger particles, allowing the odor removing media to work without interference by face loading of large airborne particles.

DustPlus should be periodically rinsed or vacuumed free of accumulated particles. Water and a mild detergent may be used on the permanently attached front polypropylene panel; the activated carbon media/disposable filter inside the DustPlus should be removed from the frame and replaced. Depending on the environment, odor removing media like activated carbon can last up to six months. Once the media reaches maximum adsorption, it is simply removed and replaced. The HVAC system's recirculating fan should be kept running to ensure maximum air contact with filtration and adsorption media.

Polypropylene Prefilter & Frame: Initial resistance .06 in. w.g.; available in stainless steel. High Density Activated Carbon: 300 grams per square foot; 60% minimum activity granular carbon; flexible nylon mesh scrim, 3/4" thickness.

Sell Sheet PDF

Home | About Permatron | News | Contact Us | Site Map